Makine Teknolojileri Elektronik Dergisi

Son Sayı Arşiv
Article Name Influence of Boro-Tempering Heat Treatment on the Fatigue Behavior of Ductile Iron
Author Name Yılmaz YALÇIN*,Yusuf KAYALI*,Metin TOPTAŞ**
Address * Afyon Kocatepe Üniversitesi, Teknoloji Fak. Metalurji ve Malzeme Müh. Böl., Afyonkarahisar/TÜRKİYE ** Afyon Kocatepe Üniversitesi, Fen Bilimler Ens., Afyonkarahisar/TÜRKİYE ykayali@aku.edu.tr
Abstract In this study, fatigues properties of spheroidal graphite cast iron boronized, austempered and boro-tempered were investigated. The comparison of fatigue strength at one limit of the form of spheroidal graphite cast iron castings has been identified. The commercial samples imbedded in Ekabor-2 powder were borided at 900 ° C for 2 hours and then air cooled from the furnace. The samples were boro-tempered in Ekabor-2 powder at 900 ° C for 2 hours followed by tempering at 250 and 350 ° C salt bath for 1 hour. Austempering, imbedded in their own chips samples, was carried out at 900 ° C for 2 hours and then tempering was performed at 250 and 350 ° C (again salt bath) 1 hour. The fatigue strength of the samples was determined using rotation-bending fatigue stress device. Fracture surfaces of the broken specimens were examined by scanning electron microscope after the test, and fractures types were obtained. Boriding and boro-tempering processes increased the fatigue resistance and fatigue strength of austempering process has led to the decline. The austempering process has been the major contributors to fatigue resistance.
Published in Electronic Journal of Machine Technologies
Issue 13
Volume 1
Pages 31-38
Year 2016
Type Paper
Language Turkish
Download Click here to DOWNLOAD  İndirThis article has been downloaded 9 times.